-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- More categories
Friedrich FPHSR18A3B 1.5 Ton Floating Air Pro Series Outdoor Unit, R454B, 21 SEER2
Friedrich FPHSR18A3B 1.5 Ton Floating Air Pro Series Outdoor Unit, R454B, 21 SEER2
General specs
- Product codeFPHSR18A3B
- ManufacturerFriedrich
- SKUFPHSR18A3B
Dimensions
- Dimensions12.13in x 33.88in x 25.50in
- Weight97.00lb
Friedrich FPHSR18A3B 1.5 Ton Floating Air Pro Series Outdoor Unit - R454B, 21 SEER2
Description:
This outdoor mini split condenser features inverter technology to cool your space more efficiently than a standard air conditioner unit.
A unit that has inverter technology offers variable compressor speeds that keep up with your comfort control needs.
It uses variable capacity at the initial start up to reach your set temperature quickly.
Once the set temperature is reached, the condenser reduces its capacity.
And then, rather than shutting off completely like a standard air conditioner, it uses variable capacity to maintain your set temperature.
An inverter system reduces your operation and energy costs by eliminating the constant compressor start-ups and shut-downs of traditional air conditioners.
The Friedrich FPHSR18A3B 18,000 BTU Floating Air Pro Series condenser is a single zone outdoor unit.
It can be used with the Friedrich FAHFW18A3A Wall Unit.
The outdoor unit comes pre-charged with refrigerant sufficient for 25 ft. of line.
As the US moves away from R410A refrigerant, manufacturers are using alternative replacement refrigerants.
R454B is the replacement refrigerant being used in Friedrich's line of Floating Air Pro Series mini split systems.
R454B features a Global Warming Potential (GWP) of 467.
The larger the GWP, the more that specific gas warms the Earth.
Below is a comparison chart of GWPs now being used by manufacturers versus R410A which is being phased out.
General Features:
Low GWP R454B Refrigerant
Precision Inverter Technology / Variable Speed Compressor for energy efficiency and smooth performance
Soft Start Technology - starts compressor at reduced amperage
BLDC motor
Easy installation - Your system will be up and running in just a few short hours in most cases.
DiamonBlue Advanced Corrosion Protection - Protects the outdoor coil against deterioration and extends the life of the unit especially in harsh coastal environments
Low installed cost - Ductless systems have a clear advantage over central air conditioning when ducts are not already present
Lower utility bills - Unlike central air conditioners that cool all the areas the same, ductless systems cool only those rooms you tell it to.
No more wasted dollars on cooling unused rooms
Ultra quiet operation - Ductless systems are in sharp contrast to other types of air conditioners where the rush of air from ducted vents can be annoying, or where compressor noise of window units can be objectionable
Permanent installation - Unlike traditional window air conditioners, ductless split systems leave window views unobstructed.
And, because it is a permanent installation, there is nothing to remove or store over the winter.
Specifications:
Capacity Cooling BTUs | 18,000 |
Capacity Heating BTUs | 18,000 |
Sensible Heat Ratio | 79.0% |
COP | 3.7 |
HSPF2 | 10.0 |
SEER2 | 21.0 |
EER2 | 12.95 |
Moisture Removal Pts/h | 2.7 |
Airflow (High/Med/Low/Quiet) | 647/588/482/382 CFM |
Sound Rating | 58 dB-A |
Operating Range - Heating | -13°F - 75°F |
Operating Range - Cooling | 5°F - 118°F |
Voltage | 230/208V-60Hz-1P |
Min. Ampacity | 20.0 A |
Cooling Watts | 1360 W |
Cooling Amps | 6.1 A |
Heating Watts | 1460.0 W |
Heating Amps | 6.5 A |
Max. TD Fuse/Breaker | 30 A |
Refrigerant | R-454B |
Compressor Type | Rotary Inverter |
Connections | Flared |
Liquid Line | 1/4" |
Suction Line | 1/2" |
Dimensions:
Product Height (in.): 25.5”
Product Width (in.): 33.875”
Product Depth (in.): 12.125”
Unit Weight: 97 lbs.