-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Sensors
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
First Co. 24VAQ-3 2 Ton Vertical Air Handler
$1,577.28
Product code:24VAQ-3
Product available

First Co. 24VAQ-3 2 Ton Vertical Air Handler
$1,577.28
General specs
- Product code24VAQ-3
- ManufacturerFirst Co.
- SKU24VAQ-3
Dimensions
- Dimensions16.12in x 20.12in x 39.25in
- Weight95.00 lb
Technical Specifications
- Brand First Co.
- CFM @ 0.5" ESP 890
- CFM High @ 0.3 ESP 760
- Liquid Line 3/8"
- Max. Fuse Size 15
- Min. Circuit Amps 9
- Motor Type PSC
- Nominal CFM 800
- Nominal Tons 2 Ton
- Product Type Vertical Bottom Return Air Handler
- Suction Line 5/8"
- TXV Included No
- Voltage 120 V
First Co. 24VAQ-3 2 Ton Vertical Air Handler
Description:
- VAQ series air handler is primarily for upflow installations but can be used horizontally with a drain pan.
- Includes cooling coil, hot water coil, circulating pump, air purge valve, check valve, flue gas door switch, 120V blower motor, filter, and 24V transformer.
- Converts gas or oil-fired water heater into a multi-purpose heating and hot water appliance.
- Wall thermostat activates circulating pump to move hot water to the air handler's hot water coil.
- Fan motor pushes cool return air over the hot water coil to absorb heat.
- Delivers warm air (105-110°F) through the duct system into the home.
- Returns cooled water to the heater for reheating.
Features:
- Built-in circulating pump, air purge valve, and easy access hot water check valve
- Factory installed filter
- Piston-type metering device on cooling coil
- Flue gas door switch
- Copper tube heating and cooling coils
- Compatible with all properly sized gas or oil-fired water heaters
- Compatible with most major brands of split condensing units
- Primary and secondary cooling coil drain connections
- Horizontal drain pan for 24-36VAQ is Part No. 935-1 (will not fit 18VAQ). Airflow from right to left
- Horizontal drain pan for 42 and 48VAQ is Part No. 935-2. Airflow from right to left
- Freeze protector for hot water coil is Part No. 941-1 (brings pump on below 38 degrees)