-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Fernco 3001-150 1.5" x 1.5" ProFlex Coupling
$11.73
Product code:3001-150
Product available
Fernco 3001-150 1.5" x 1.5" ProFlex Coupling
$11.73
General specs
- Product code3001-150
- ManufacturerFernco
- SKU3001-150
Dimensions
- Dimensions2.13in x 0.00in x 0.00in
- Weight3.00 lb
Technical Specifications
- Brand Fernco
- Material Neoprene
- Product Size 1.5"
Fernco 3001-150 1.5" x 1.5" ProFlex Coupling
Description:
- Designed for resistance to heavy earth loads and shear forces, providing improved pipe alignment
- Creates rigid, long-lasting pipe joints resistant to shear forces
- Connects cast iron, plastic, steel, copper, and tubular drain waste and vent systems
- Suitable for pipe diameters from 1-1/2" to 8"
- 0.012" stainless steel shield
- 301 Stainless Steel Clamp Bands
- Neoprene gasket material with Part No. and application marked on each gasket
- Shield Assembly: All 300 Series stainless steel components
- Clamp Band: 301 stainless steel, 0.025" x 0.500" x required length
- Housing: 301 stainless steel (Fernco)
- Screw: 305 stainless steel, 5/16" hex (no slot)
- Shield: 301 stainless steel, 0.012" x 2.125" x required length
- Eyelet: 305 stainless steel
- Installation Torque: 60 lb-in
- Maximum test pressure: 4.3 PSI (29.6 KPA)
- Maximum operating temperature: 180°F
- Complies with ASTM C1460 requirements