-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
EWC Controls 8X14 ND-15S Motorized Damper 15 Second Power Open/ Power Close
EWC Controls 8X14 ND-15S Motorized Damper 15 Second Power Open/ Power Close
General specs
- Product code8X14 ND-15S
- ManufacturerEWC Controls
- SKU8X14 ND-15S
Dimensions
- Dimensions14.00in x 7.00in x 17.00in
- Weight5.30lb
EWC Controls 8X14 ND-15S Motorized Damper 15 Second Power Open/ Power Close
General Features:
The MA-15S motor actuator is easy to install, easy to wire up, and comes with a 5 year warranty.
The superior design insures long life and zero maintenance.
The Motor can be oriented in any position in a conditioned area.
The UL Listed Motor Actuator is a 24vac 3 wire power open & power close type rated at 18 inch lbs. of torque and 15 second travel time.
The MA-15S can also operate in floating mode and is compatible with Carrier® Infinity & Bryant® Evolution communicating zone control systems.
The MA-15S includes an integrated wiring terminal block, and has a NEMA1 rated housing.
Dual End-Stop adjustments allow for a maximum Open and Minimum Close field position capability.
Specifications:
Power Supply | 24 VAC ± 20% 50/60Hz (24 VDC ± 10%) |
Power Consumption | 1.5 W |
Transformer Sizing | 2.5 VA (Class 2 power source) |
Electrical Connection | Screw Terminal (26 to 14 GA Wire) |
Control Function | Open / Close or Floating Point |
Torque | 18 in-lb [2 Nm] |
Manual Override | External Push Button |
Running Time | 15 seconds, constant independent of load |
Humidity | 5 to 95% RH Non-Condensing |
Ambient Temperature | -22°F to +122°F [-30°C to +50°C] |
Storage Temperature | -40°F to +176°F [-40°C to +80°C] |
Housing | NEMA 1 / IP20 |
Housing Material | UL94-5VA |
Agency Listings | cULus |
Noise Level | 45 dB(A) |
Dimensions:
Product Height (in.): 17”
Product Width (in.): 7”
Product Depth (in.): 14”
Unit Weight: 5.3 lbs.