Live chat

Daikin DSC1804D000001S 15 Ton Light Commercial Packaged Air Conditioner 460V 3PH, R-32

$17,767.26
Manufacturer:Daikin
SKU:DSC1804D000001S
Product code:DSC1804D000001S
Product available
Daikin DSC1804D000001S 15 Ton Light Commercial Packaged Air Conditioner 460V 3PH, R-32
$17,767.26

General specs

  • Product codeDSC1804D000001S
  • ManufacturerDaikin
  • SKUDSC1804D000001S

Dimensions

  • Dimensions137.00in x 90.00in x 54.50in
  • Weight1,851.00 lb

Technical Specifications

  • Compressor LRA 103.0
  • Compressor RLA 10.9
  • Compressor Stages Single Stage
  • Compressor Type Scroll
  • Configuration Downflow
  • Cooling Capacity 172,000 BTU
  • Drain Size 1"
  • EER 11
  • Nominal CFM 5000 (Max)
  • Nominal HP 0.33 HP
  • Nominal Tons 15 Ton
  • Refrigerant R32
  • RPM 300-1600
  • Sound Level 80.4 dBA
  • Voltage 460v 3 Phase 60 Hz
  • DSC Specifications
  • Light Commercial Brochure
  • DSC Installation Manual
Daikin DSC1804D000001S 15 Ton Light Commercial Packaged Air Conditioner 460V 3PH, R-32

Description:

  • The DSC light commercial heat pump packaged unit offers energy-efficient heating and cooling performance in one self-contained unit.
  • This 14 SEER unit is suitable for ground-level or rooftop installations and horizontal or downflow applications.
  • The heavy-gauge, galvanized steel cabinet with UV-resistant powder-paint finish withstands all weather conditions and time.

General Features:

  • High performance, low noise scroll compressors to match the required total load.
  • Resiliently factory-mounted on rubber grommets for vibration isolation
  • Refrigeration circuit includes both high and low pressure safety switches
  • Unit is factory charged with environmentally friendly Low GWP R32 refrigerant.
  • Two single-stage scroll compressors individuality circuited for partial load applications
  • Compressor location outside the condenser section to avoid air bypass.
  • Crankcase heaters and external thermal overload protection are also provided for compressor durability.
  • Internal overload protection included with compressor.
  • Supply fan will be 2 direct-drive motors. Ball bearing Direct-Drive EEM motor removes the need for belts, sheaves, bearings and lubrication.
  • Slide out forward curb fans for easy maintenance and replacement
  • High-static drive options for applications with high airflow/static requirements
  • Each fan assembly is dynamically trim balanced at the factory before shipment for quick start-up and efficient operation.
  • Motor equipped with thermal overload to provide protection and lasting operation.
  • The indoor coil section is installed in a draw through configuration to provide better dehumidification. These coils are constructed with seamless copper tubes, mechanically bonded into aluminum plate-type fins with full drawn collars to completely cover the tubes for high operating efficiencies.
  • Coils are factory pressure tested to ensure pressure and leak integrity
  • Coils include a Thermal Expansion Valve per circuit, high- and low pressure switches, service ports and high capacity filter drier.
  • All units use large face area outdoor coils
  • Microchannel heat exchanger technology on all condenser coils for improved performance and reduced refrigerant load.
  • Units are factory-wired with color-coded wires and complete 24-volt Electromechanical controls package.
  • Units include single-point power entry as standard.
  • Terminal strips are provided as standard for easy installation and low voltage power wiring
  • Unit provides a draw-through filter section as standard for better air quality and long lasting component maintenance.
  • Filters installed on the units are standard off the shelf sizes for easy replacement.


Top