-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Sensors
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Carrier 45MHHAQ18XC3 1.5 Ton High Wall Ductless Indoor Fan Coil, R-454B
$544.25
Category:Indoor Wall Mounted
Manufacturer:Carrier
Product code:45MHHAQ18XC3
Available
Delivery Information
Shipping available
Pick your shipping method at checkout.

Carrier 45MHHAQ18XC3 1.5 Ton High Wall Ductless Indoor Fan Coil, R-454B
$544.25
General specs
- Product code45MHHAQ18XC3
- ManufacturerCarrier
- SKU
Dimensions
- Dimensions (L x W x H)8.90in x 38.20in x 12.60in
- Weight100.00 lb
Technical Specifications
- Liquid Line 1/4"
- Nominal Tons 1.5 Ton
- Refrigerant R-454B
- Suction Line 1/2"
- Voltage 208-230 VAC
- Weight 32.8
Carrier 45MHHAQ18XC3 1.5 Ton High Wall Ductless Indoor Fan Coil, R-454B
Features
- The 45MHHA series ductless systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires.
- The fan coil is mounted on the wall, near the ceiling. This selection of fan coils permits creative solutions to design problems such as:
- Add-ons to current space (an office or family room addition)
- Special space requirements
- When changes in the load cannot be handled by the existing system
- When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork
- Historical renovations or any application where preserving the look of the original structure is essential.
- The ideal compliment to your ducted system when it is impractical or prohibitively expensive to use ductwork. These compact indoor fan coil units take up very little space in the room and do not obstruct windows. The fan coils are attractively styled to blend with most room decors.
- Advanced system components incorporate innovative technology to provide reliable cooling performance at low sound levels.
Specifications
- Blower Motor HP 1/30
- Blower Motor Speeds 4
- Blower Motor Type ECM (Electronically Commutated Motor)
- CFM 271-400
- Cooling Capacity 18,600
- Cooling Rated Capacity Btu/h 18000
- Cycle/Hertz 60 Hz
- Heating Capacity 19,200-19,200
- Liquid Line Size (OD) 1/4"
- Mounting Type Wall-Mount
- Phase Single
- Refrigerant R-454B
- Suction Line Size (OD) 1/2"
- Tonnage 1.5
- Voltage 208-230 VAC
- Multi Zone false
- Metering Device EEV - Electronic Expansion Valve