Carrier® 45MCFAQ24XA3 2 Ton 45MCFA Series Ductless Indoor Fan Coil Unit, R-454B
$2,017.24
Product code:45MCFAQ24XA3
Available
Carrier® 45MCFAQ24XA3 2 Ton 45MCFA Series Ductless Indoor Fan Coil Unit, R-454B
$2,017.24
General specs
- Product code45MCFAQ24XA3
- ManufacturerCarrier
- SKU45MCFAQ24XA3
Dimensions
- Dimensions (L x W x H)26.50in x 42.00in x 9.20in
- Weight100.00 lb
Technical Specifications
- Cooling Capacity 24,000 BTUs/hr
- Heating Capacity 24,000 BTUs/hr
- Liquid Line 3/8"
- Nominal Tons 2 Ton
- Refrigerant R-454B
- Suction Line 5/8"
- Voltage 208-230 VAC
- Weight 73.1
Carrier® 45MCFAQ24XA3 2 Ton 45MCFA Series Ductless Indoor Fan Coil Unit, R-454B
Description
- The 45MCFA series ductless system are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires.
- The fan coil can be mounted on the floor or against the wall. This selection of fan coils permits creative solutions to design problems such as:
- Add-ons to current space (an office or family room addition)
- Special space requirements
- When changes in the load cannot be handled by the existing system
- When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork
- Historical renovations or any application where preserving the look of the original structure is essential
Specifications
- AHRI – Usage Indoor AHU
- Blower Motor HP 1/10
- Blower Motor RPM 1,200
- Blower Motor Speeds 4
- Blower Motor Type ECM (Electronically Commutated Motor)
- Blower Motor Watts 98
- Brand Carrier®
- CFM 377-736
- CFM Heating 376.7-735.75
- Cooling Capacity 24,000
- Cooling Rated Capacity Btu/h 24000
- Cycle/Hertz 60 Hz
- Energy Star Rated true
- Equipment Type Heat Pump
- Heating Capacity 24,000
- Liquid Line Size (OD) 3/8"
- Mounting Type Ceiling or Floor
- Phase Single
- Product Family 45MCFA
- Prop 65 true
- Refrigerant R-454B
- Remote Control Included true
- Sound Level (dBA) 29-51.5
- Suction Line Size (OD) 5/8"
- Tonnage 2
- Voltage 208-230 VAC
- Liquid Line Fitting Type Flare
- Suction Line Fitting Type Flare
- Country of Origin CHN
- Blower Wheel Diameter 6 1/10"
- Blower Wheel Width 6 2/5"
- Multi Zone true
- Metering Device EEV - Electronic Expansion Valve