-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Sensors
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Carrier 45MAHAQ09XA3 0.75 Ton Ductless Highwall Indoor Unit, R-454B
$614.44
Category:Indoor Wall Mounted
Manufacturer:Carrier
Product code:45MAHAQ09XA3
Available
Delivery Information
Shipping available
Pick your shipping method at checkout.

Carrier 45MAHAQ09XA3 0.75 Ton Ductless Highwall Indoor Unit, R-454B
$614.44
General specs
- Product code45MAHAQ09XA3
- ManufacturerCarrier
- SKU
Dimensions
- Dimensions (L x W x H)8.86in x 31.30in x 11.61in
- Weight100.00 lb
Technical Specifications
- Blower Motor Type ECM (Electronically Commutated Motor)
- Cooling Capacity 9,000
- Heating Capacity 9,000-16,000
- Liquid Line 1/4"
- Refrigerant R-454B
- Suction Line 3/8"
- Weight 23.37
Carrier 45MAHAQ09XA3 0.75 Ton Ductless Highwall Indoor Unit, R-454B
Description
- The 45MAHA series ductless systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires.
Features
- The fan coil is mounted on the wall, near the ceiling.
- This selection of fan coils permits creative solutions to design problems such as:
- Add-ons to current space (an office or family room addition)
- Special space requirements
- When changes in the load cannot be handled by the existing system
- When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork
- Historical renovations or any application where preserving the look of the original structure is essential
Specifications
- Blower Motor HP 1/20
- Blower Motor RPM 1,100
- Blower Motor Speeds 4
- Blower Motor Type ECM (Electronically Commutated Motor)
- Blower Motor Watts 50-70
- CFM 147.2-441.4
- CFM Heating 176.57-323.7
- Cooling Capacity 9,000
- Cooling Rated Capacity Btu/h 9000
- Cycle/Hertz 60 Hz
- Heating Capacity 9,000-16,000
- Liquid Line Size (OD) 1/4"
- Mounting Type Wall-Mount
- Phase Single
- Refrigerant R-454B
- Sound Level (dBA) 19.5-38
- Suction Line Size (OD) 3/8"
- Tier Standard
- Tonnage 0.75
- Voltage 208-230 VAC
- Liquid Line Fitting Type Flare
- Suction Line Fitting Type Flare
- Blower Wheel Diameter 3 9/10"
- Blower Wheel Width 25 1/10"
- Multi Zone true
- Approvals ETL Listed; UL Listed