-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
Carrier 40MAHBQ36XA3 Ductless 36k Btu/h Heat Pump High Wall Unit
Carrier 40MAHBQ36XA3 Ductless 36k Btu/h Heat Pump High Wall Unit
General specs
- Product code40MAHBQ36XA3
- ManufacturerCarrier
- SKU40MAHBQ36XA3
Dimensions
- Dimensions10.83in x 44.88in x 14.57in
- Weight75.00lb
Carrier 40MAHBQ36XA3 Ductless 36k Btu/h Heat Pump High Wall Unit
Description:
The 40MAHB series ductless systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires.
The fan coil is mounted on the wall, near the ceiling.
This selection of fan coils permits creative solutions to design problems such as:
Add-ons to current space (an office or family room addition)
Special space requirements
When changes in the load cannot be handled by the existing system
When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork
Historical renovations or any application where preserving the look of the original structure is essential.
The ideal compliment to your ducted system when it is impractical or prohibitively expensive to use ductwork.
These compact indoor fan coil units take up very little space in the room and do not obstruct windows.
The fan coils are attractively styled to blend with most room decors.
Advanced system components incorporate innovative technology to provide reliable cooling performance at low sound levels.
General Features:
Modes: Cool, Heat, Dry, Fan, Auto
Turbo Mode
Four fan speeds
Sleep Mode
Relative Humidity Sensor
Intelligent Eye (Occupancy Sensor)
ECO Mode
Up-Down Louver control (fixed or swing)
Follow Me (senses temperature at handheld remote)
Heating Setback (46° F Heating Mode)
Quiet indoor operation
Aluminum Golden Hydrophilic pre-coated fins
Specifications:
Equipment Type | Ductless High Wall |
Wired Remote Controller | Optional |
Wireless Remote Controller | Standard |
Blower Motor Type | Variable Speed ECM |
Cooling Capacity | 36000 |
Cooling Rated Capacity (Btu/h) | 36000 |
Heating Capacity | 20400-23600 |
CFM | 382-843 |
EER | 8.5 |
SEER | 17.5 |
Refrigerant | R410A |
Tonnage | 3 Ton |
Motor Phase | 1 |
Cycle/Hertz | 60 Hz |
Voltage | 208-230 VAC |
Drain Connection Size | 5/8" |
Liquid Line Size (OD) | 3/8" |
Suction Line Size (OD) | 5/8" |
Sound Level (dBA) | 39-52 |
Dimensions:
Product Height (in.): 14.57”
Product Width (in.): 44.88”
Product Depth (in.): 10.83”
Product Weight: 43.65 lbs.