Black Swan 4080 CI Pipe Neoprene Adhesive Lubricant
$39.00
Product code:4080
Product available
Black Swan 4080 CI Pipe Neoprene Adhesive Lubricant
$39.00
General specs
- Product code4080
- ManufacturerBlack Swan
- SKU4080
Dimensions
- Dimensions10.00in x 10.00in x 10.00in
- Weight8.00 lb
Technical Specifications
- Brand Black Swan
- Product Type Adhesive Lubricant
- Weight 7.5
Miscellaneous
- Color Black
Neoprene Adhesive Lubricant, Black
Description
- Black Swan's Adhesive-Lube is a unique, black, one component liquid neoprene adhesive developed to improve installation and sealing of compression type gaskets for cast iron pipe joints
- It is strongly recommended for joining all untarred pipe and fittings and for all tarred large diameters (5" through 15") pipe and fittings
- Makes joints immediately. Once set, the joints are extremely difficult to separate.
Directions
- Stir before using.
- Clean hub and spigot; remove dirt, mud gravel or other foreign matter.
- Apply 1 coat of Black Swan Adhesive-Lube to interior of female hub of pipe.
- Allow to dry 1 to 2 minutes and insert gasket into hub.
- Apply 1 coat of Black Swan Adhesive-Lube to inside of gasket and outside of male pipe joint. Do not apply to spigot unless joining untarred material.
- Allow drying time of approximately 1 to 2 minutes and insert male pipe to complete coupling.
Physical Properties
- Specific Gravity 0.89
- Viscosity 1000 CPS ± 250 CPS
- Solids Content Weight 23.5%
- Volume 17.7%
- Flash Point 5°C (41°F) ASTM- D 3278
Specifications
- Adhesive Type Neoprene
- Applicable Standard ASTM D3278
- Application Compression Gasket, Pipe and Fitting
- Bonding Time 1 to 2 Minute (Dry Time)
- Brand Black Swan
- Color Black
- Container Type Can
- Product Type Adhesive Lubricant
- Temperature Resistance 50 to 70 Deg F