iO HVAC Controls iO-ZP6-ESP-EP 3-Zone Expansion Panel For The ZP6-ESP
iO HVAC Controls iO-ZP6-ESP-EP 3-Zone Expansion Panel For The ZP6-ESP
General specs
- Product codeCP10
- ManufactureriO HVAC Controls
- SKUiO-ZP6-ESP-EP
Dimensions
- Dimensions14.00in x 14.00in x 6.00in
- Weight2.50lb
iO HVAC Controls iO-ZP6-ESP-EP 3-Zone Expansion Panel For The ZP6-ESP
Description:
The ZP6-ESP-EP is a 3 zone expansion panel for the ZP6-ESP, 6 zone logic panel.
As many as 2 ZP6-ESP-EP expansion panels can be used with a ZP6-ESP panel for a total of 12 zones.
General Features:
When adding the expansion panel, make sure that all 24 volt power is turned off.
Mount the ZP6-ESP-EP no more than 2 inches under the ZP6-ESP-PRO master panel.
This will allow enough room to facilitate wiring and connection of the communications ribbon connector.
Each ZP6-ESP-EP receives 24 volt from the main panel transformer. Make sure that 24 volt common and hot match.
Zone thermostats and dampers wire the same as on the ZP6-ESP-PRO panel.
If only one ZP6-ESP-EP is added to the ZP6-ESP-PRO panel, set the Expansion Panel Selector Switch to ‘A’.
If a second ZP6-ESP-EP is added, set its Expansion Panel Selector Switch to ‘B’.
Specifications:
Dimensions:
Unit Height (in.): 6”
Unit Width (in.): 14”
Unit Depth (in.): 14”
Unit Weight: 2.50 lbs.
Purchased with this product
