-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
Spacepak ESP-2430J Scratch Unit High Efficient Horizontal 2-2.5 Ton Blower Coil Unit
Spacepak ESP-2430J Scratch Unit High Efficient Horizontal 2-2.5 Ton Blower Coil Unit
General specs
- Product code45ESP2430JH4MB-SD
- ManufacturerSpacepak
- SKU45ESP2430JH4MB-SD
Dimensions
- Dimensions29.38in x 24.25in x 14.13in
- Weight105.00lb
Spacepak ESP-2430J High Efficient Horizontal 2-2.5 Ton Blower Coil Unit, Minor scratches, manufacturer warranty applies.
Description:
Model with New J+ Display Control Board.
SpacePak is a high-velocity central air conditioning system which utilizes a conventional outdoor condensing unit matched with the indoor Model ESP-J fan coil unit to provide conditioned air through the specially-designed, pre-fabricated, pre-insulated flexible duct system.
The system and its basic components operate the same as in any conventional air-to-air cooling system.
All SpacePak J series air handlers are delivered from the factory configured to operate on 230V input power.
The J series units are field convertible to 115V input.
General Features:
J+ Advanced control board
2 Line display for easier setup
Mode specific adjustable speed control
High efficiency EC integrated motor/blower assembly
Slide out blower R410A refrigerant
Heat pump compatible
Six-row copper/aluminum evaporator coil
Sweat-type refrigerant connections
Factory installed Chatleff TXV
Anti-frost control
24V 50/60 hz transformer
Fan relay
Insulated cabinet
Float switch
Condensate trap
Anti-vibration foam strips
Mold resistant polyethylene primary drain pan
Specifications:
Model | ESP-2430J |
Nominal Tons | 2 - 2.5 Ton |
Liquid Connection | 3/8" |
Suction Connection | 7/8" |
Motor HP | 3/4 |
Motor F.L.A. | 6.8 |
F/L Amps | 5.6 |
Max. Duct external static pressure | 1.3" W.C. |
Max. Outlet air temperature | 200°F |
Minimum circuit Ampacity | 9.5 |
Voltage | 230V 1P/60Hz |
Minimum circuit breaker | 15 Amps |
Refrigerant | R410A |
Design pressure (Low side) | 250 Psig |
Design pressure (High side) | 450 Psig |
Dimensions:
Product Height (in.): 14.125”
Product Width (in.): 24.25”
Product Depth (in.): 29.375”
Product Weight: 105 lbs.