DiversiTech® UC1636-3 Condensing Pad

DiversiTech® UltraLite® 16x36x3

The UltraLite® Equipment Pads are composed of Type I expanded polystyrene foam (EPS) having a nominal 1.0-pound-per-cubic-foot (16.0 kg/m3) density. The pads are molded in a form in which a cement slurry and polypropylene ber mat are bonded to ve sides of the EPS foam.

The pad is offered in both a 2-inch (51mm) or 3-inch (76mm) thickness. The composite coating is approximately 7/32 inch (5.6mm) to ¼ inch (6.4mm) thick on the pad surface.

Installation:

The equipment pads are installed directly on undisturbed natural soil or compacted ll that has been cleared and leveled. The pad is then placed on the soil and the equivalent is located thereon.

The soil must be nonexpansive and have a minimum allowable foundation pressure of 1,000 pounds per square foot (48 kPa) as determined by the building official. Each equipment pad is identified with an adhesive-backed label indicating UltraLite®. Each pallet/package of pads is further identified with the DiversiTech Corporation, address, telephone number and the evaluation report number.

Specifications:

Weight (in lbs)	18.1
Brand/Manufacturer	DiversiTech®
Height	3"
Width	16"
Length	36"
Capacity	756 Pounds