American Made, Veteran Owned and Operated!
 

ICM Controls ICM495-60A-NF 60 Amp Non-Fused Disconnect With Internal Surge Protection

  • $93.28

Add to Wish List

Compare this Product

Availability: In Stock

Brand: ICM Controls

Product Code: ICM495-60A-NF

SKU: ICM495-60A-NF

Product views: 2364

ICM Controls ICM495-60A-NF 60 Amp Non-Fused Disconnect With Internal Surge Protection


Description:


  • The ICM495 is a UL Listed Electrical Disconnect with an Internal Surge Protective Device built-in. 

  • The ICM495 is available in two models 30A Fused and 60A Non Fused.

  • The included field replaceable Type 2 SPD is intended for 240 VAC Split Phase configurations. 

  • When a surge occurs, the ICM495 will absorb the surge up to the limits expressed in the specifications section in this guide. 

  • The ICM495 incorporates thermal protection on the surge elements (TMOV’s) which allows for safe disabling of the surge elements when a surge exceeds the thermal limits of the device. 

  • The ICM495 has a status light on the control which identifies operational status when illuminated. 

  • The ICM495 can be installed as a Type 2 device for both indoor and outdoor applications. 

  • Suitable for use on a circuit capable of delivering not more than 10kA RMS symmetrical amperes, 240V maximum.


General Features:


  • UL Listed Electrical Disconnect including both enclosure & surge protector

  • 120VAC single-phase, 240VAC split-phase

  • Features an internal field replaceable surge protective device (SPD)

  • Maximum Surge Current Rating of 100kA

  • Highest UL rating for nominal discharge current (In 20kA), for increased longevity & durability of the SPD

  • Constructed with 2 high-quality thermally protected MOV’s (TFMOV)

  • Completely factory wired for quick and easy installation

  • NEMA type 3R rated powder coated metal enclosure for indoor/outdoor use

  • Fully accessible mounting holes, no dissembling required

  • Braided strap thoroughly grounding both the enclosure and cover

  • LED indicator light showing when Surge Protection is operational

  • 30A Fused & 60A non-fused models available

  • Made in the USA


Specifications:


Input

Voltage

Split phase 240 VAC

Frequency

50/60Hz

Contact Ratings

Voltage

240 VAC

FLA

30A/60A (depending on model)

LRA

360A

Mechanical

Mounting

Four mounting holes in back of enclosure

Diagnostics

Green LED indicates surge protection present

Enclosure

NEMA Type 3R metal enclosure for outdoor and indoor installation

Parameters

Short Circuit Current Rating (SCCR)

10kA

Nominal discharge current (In)

20kA

Protection mode

L1-L2, L1-N, L2-N

Maximum Continuous Operation Voltage (MCOV):

L-L

300 VAC

L-N

150 VAC

VPR:

L-L

1200 VAC

L-N

700 VAC

SPD type

Type 2

Surge protection technology

TFMOV


Replaces: 


All standard disconnect boxes rated for equal voltage and current configurations

MARS

83915

RectorSeal

RSH-50 96419


Dimensions:


Product Height (in.): 2.50”

Product Width (in.): 5.25”

Product Length (in.): 9”


ICM Controls 1.png
Thumb File information
pdf-50x50.png Installation Manual.pdf 484.13KB 90
pdf-50x50.png Specification Sheet.pdf 528.31KB 87
pdf-50x50.png Warranty Information.pdf 171.09KB 100

Reviews

There are no reviews for this product.

  • 0%
  • 0%
  • 0%
  • 0%
  • 0%

Reviews Over ICM Controls ICM495-60A-NF 60 Amp Non-Fused Disconnect With Internal Surge Protection

Total Reviews (0)
click here write review to add review for this product.