-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
ICM Controls ICM387 Pressure Transducer
ICM Controls ICM387 Pressure Transducer
General specs
- Product codeICM387
- ManufacturerICM Controls
- SKUICM387
Dimensions
- Dimensions72.00in x 0.00in x 0.00in
- Weight0.00lb
ICM Controls ICM387 Pressure Transducer
Description:
The standard design is ideal for demanding HVAC and refrigeration applications where long-term reliability is a must.
The transducer is designed to operate with a 5Vdc supply, and to provide a robust 0 to 5Vdc output.
The output is ratiometric to supply voltage, allowing the user to maintain accuracy with variation in the supply voltage.
The electrical interface is a rugged industry accepted connector.
The brass pressure connection has multiple threads.
This device maintains accuracy through a wide temperature range.
General Features:
Discharge and suction pressure monitoring
Subcooling and superheat calculations
Compressor oil pressure monitoring
Condenser fan control
Compressor staging and unloading
Electronic expansion valve control
Remote systems diagnostics and trending
Ceramic capacitive sensor
Durable, compact design
Accurate performance over wide temperatures
Overvoltage and short circuit protected
Brass connector
Sealed gauge (neoprene seal)
Specifications:
Product Type | Pressure Transducer |
Pressure Ranges | 0-500 psi |
Temperature Range | 70°F – 100°F (21° to 38°C) |
Performance | |
Accuracy | +/- 1.2% span (linearity, hysteresis, repeatability, calibration) |
Temperature error | +/- 0.013% °C |
Operating Temperature | -40°C to +135°C |
Electrical | |
Supply Voltage (Vin) | 4.5 to 5.5 Vdc |
Output Voltage (Vout) | 0.5 to 4.5 Vdc typical |
Supply Current | 8 mA (maximum @ 5.5 Vdc with no load) |
Output Current | 2.5 mA (maximum sink or source) |
Output Load | 10K ohms typical Output Output Response Time: 10 mS |
Overvoltage Protection | 16 Vdc |
Reverse Voltage | 14 Vdc |
Short Circuit Protected | Yes |
EMC (512 MHz-1 GHz) | 25 V/m |
EMC (10 MHz-512MHz) | 50 V/m |
ESD (CDF-AEC-Q100-002) | 15k V |
Physical | |
Proof Pressure | (5X) 15-75 psi, (3X) 100-300 psi, (2X) 500 psi |
Burst Pressure | 2CP5 1500 psi/2500 psi minimum, 2CP50 2500 psi minimum |
Cycle Life | 10M F.S. cycles |
Random Vibration (50-2000 Hz) | 11g |
Drop (any axis) | 1.5 m |
Electrical Connection | Nema 4X, IP65 |
Dimensions:
Product Length (in.): 72”