Rectorseal AG-9100 AquaGuard External Audible & Visual Remote Alarm
The AG-9100 External Audible & Visual Remote Alarm is the ONLY multipurpose remote alarm that is approved for use withThe AG-9100 Audible & Visual Remote Alarm features a 12-24 VAC / 6-32 VDC circuit, which can be integrated into most monitoring systems (home alarm, water detection or condensate management system, etc.) and has a low amperage draw of 100mA – no battery required.
When activated, the AG-9100 produces a audible and visual signal. The loud 103 decibel audible alert can be heard from over 100 feet away. In addition, five (5) bright white LED lights flash and are visible both day and night when the alarm is activated. The AG-9100 External Audible & Visual Remote Alarm is equipped with an on/off switch to silence the audible alarm.
The AG-9100 External Audible & Visual Remote Alarm can be mounted on a vertical wall, on a ceiling, or any outside surface of a hot water tank or HVAC/R unit and comes complete with a strong adhesive pad for quick-and-easy installation. In addition, the alarm also features two back mounting slots for nail or screw heads for flush wire mounting.
Unlike competitors’ electronic condensate overflow switches that have an on-site diagnostics LED display that must be attached directly to the HVAC/R unit, the AG-9100 External Audible & Visual Remote Alarm can be mounted over 250 feet away from the condensate overflow switch. With the alarm located in a convenient or highly visible location, there is no need to go up into an attic, on a roof, or down into a basement to check on the status of the HVAC/R unit. For quick-and-easy installation, a foot of lead wire is also included with the AG-9100 External Audible & Visual Remote Alarm.
|Alarm Data and Installation|